More

FREQUENTLY ASKED QUESTIONS

8.  What is the difference between your gate padding and what is currently available through other padding manufacturers?

9. Do you offer replacement padding for home plate rotationals and scorer's tables?

10.  Do you have a solution to alleviate having to paint a yellow home run line on our field padding?

11.  What if I have angled "I-Beams" or columns in my facility? Is it possible to make a pad to cover these areas?

12.  I have outdoor light poles with electrical conduit and boxes attached; could you pad this type of area?

13.  How do you build a pad for an outdoor pole/post with a large concrete base?

14.  What if I have to pad something unique or unusual?

15. What is CA Proposition 65 Warning?

8.  What is the difference between your gate padding and what is currently available through other padding manufacturers?

 

If you look at standard gate pads, they either cover the top, sides, and bottom of the gate or they cover the gate, but leave the hinge exposed at a 45 angle.

 

Our baseline Sliding Gate Pads cover the hinges and have a mechanism that allows the gate to be easily opened into the field of play without scrunching up the padding. From the field view, you can't tell the difference between a regular wall pad and a gate pad.

 

Our patented Automatic-Wedge Gate Pad has a wedge built in that automatically lifts out when the gate is opened and automatically resets against the hinge when the gate is closed, leaving a flush looking presentation.

Both the sliding and hinged gate systems were designed by our engineers to address customer concerns and are patent protected.  To view our gate systems, refer to our GATE and DOOR PADDING page.

9.  Do you offer replacement padding for home plate rotationals and scorer's tables?

 

Yes. We use special connection hardware that stretches the vinyl taut and smooth - and allows for replacement when necessary. It makes an attractive presentation that is more durable than using Velcro connections, which can break-down quickly and are commonly used by other padding manufacturers. Our integrated digital printing services make it easy and economical to change out sponsorship advertising on the vinyl cover.

 

10.  Do you have a solution to alleviate having to paint a yellow home run line on our field padding?

 

Yes. We developed two products that solve this issue.

a. If the home run line is along bullpen fencing, we offer a wood-backed L-shaped fence-top pad with yellow fabric that is welded at the top of your standard stadium colored vinyl.

b. If the home run line is along your outfield wall, we offer a yellow line that is welded to the top of the wall pads, which is seamless. In either scenario, there would be no need to paint the home run line again.e to refer to our CUSTOM SOLUTIONS page.

11.  What if I have angled I-Beams or oddly shaped columns in my facility? Is it possible to make a pad to cover these areas?

 

Yes. We ask you to take a measurement at the top (72" height) of the I-beam/column and one at the bottom which allows us to capture the angle required to build the padded box to cover it. We are also able to incorporate cut-outs in the column pads as well. Please refer to our COLUMNS & I-BEAMS page.

 

12.  I have outdoor light poles with electrical conduit and boxes attached; could you pad this type of area?

 

It will be very helpful to send a digital photograph with your quote request and we will advise what measurements are necessary to design a custom solution and provide an accurate estimate. Typically, we build a box around the electrical components and a round pad to cover the pole. The two fit together. Feel free to refer to our CUSTOM SOLUTIONS page.

 

13.  How do you build a pad for an outdoor pole/post with a large concrete base?

 

We build a pad to cover the concrete base and a round or square pad for the upright. We ask that you provide a photograph accompanied with the circumference and height of the concrete base along with the circumference of the pole. We also need the measurement from the outer edge of the concrete base to the pole. We provide a CAD drawing for your approval to confirm the measurements prior to fabrication. Feel free to find more information on our POST PADS page.

 

14.  What if I have to pad something unique or unusual?

 

You'd be surprised at what we protect with padding. Send us a picture and measurements, and we will design a custom solution for you, removable, temporary, or permanent. We have padded dispensers, MMA cages, bike racks, camera wells, stadium seats, television and motion picture props, machinery, and pretty much everything else. We welcome all custom padding work as this is our specialty. We also offer plain or graphically printed windscreen and vinyl covers.Take a look at some of our special projects on the CUSTOM SOLUTIONS page.

SPORTS VENUE PADDING

Indoor & Outdoor Field Padding & Mats | Manufacturer, Graphic Printer,

Installer of Protective Padding for Sports Facilities & Fields

Sports Venue Padding
by Artistic Coverings
14135 Artesia Blvd., Cerritos, CA 90703
 
Email: info@svpadding.com
 
P: 562-404-9343       F: 562-404-9335  
Toll Free:  877-599-685
Toll Free Fax: 877-599-9335